JCP Specifications:

Double Bunk Ladder (J-1-8661)

Double bunk ladder rails are fabricated from 7 gauge HRPO steel and are bolted to the upper and lower bunk with (8) 1/4-20 button head Torx screws. Ladder treads are fabricated from 10 gauge HRPO steel and welded to the ladder rails to form one ladder unit. The ladder unit will be prime or finished painted according with the paint requirements of the bunk.

 

Bunk Shelf (J-1-8671) (not shown)

Bunk shelf is fabricated from 10 gauge HRPO steel and is bolted under the bunk pan with (8) 1/4-20 button head Torx screws. The size of the shelf is 24 wide x 24 long x 8 high and will be prime or finished painted according with the paint requirements of the bunk. Note: JCP Model J-8671 denotes a quantity of (1) one shelf independent of the number of bunk pans.

 

Bunk Drawer w/ Hasp (J-1-8681)

Bunk drawer is fabricated from 14 gauge HRPO steel and is 21-1/2 wide x 24-1/2 long x 8 high. The 11 gauge HRPO steel drawer guides are bolted under the bunk pan with (8) 1/4-20 button head Torx screws. The 7 gauge HRPO steel stop is bolted under the bunk pan with (3) 1/4-20 button head Torx screws. The 1/4 HRPO steel hasp is welded under the bunk pan and protrudes through a slot in the drawer for locking with a pad or combination lock provided by others. The entire drawer assembly will be prime or finished painted according with the paint requirements of the bunk. Note: JCP Model J-8681 denotes a quantity of (1) one drawer assembly independent of the number of bunk pans.

 

Bunk Drawer w/ Lock (J-1-8682) (not shown)

Bunk drawer is fabricated from 14 gauge HRPO steel and is 21-1/2 wide x 24-1/2 long x 8 high. The 11 gauge HRPO steel drawer guides are bolted under the bunk pan with (8) 1/4-20 button head Torx screws. The 7 gauge HRPO steel stop is bolted under the bunk pan with (3) 1/4-20 button head Torx screws. A combination lock is built into the front of the drawer. The entire drawer assembly will be prime or finished painted according with the paint requirements of the bunk. Note: JCP Model J-8682 denotes a quantity of (1) one drawer assembly independent of the number of bunk pans.

 

Bunk Safety Rail (J-1-8691) (not shown)

Bunk Safety rail is fabricated from 5/8 diameter bar and is welded to 7 gauge HRPO steel mounting plates. The 60 long x 8 high assembly is mounted to either side of the bunk pan with (3) 3/8-16 button head Torx screws. The entire rail assembly will be prime or finished painted according with the paint requirements of the bunk. Note: JCP Model J-8691 denotes a quantity of (1) one rail assembly independent of the number of bunk pans or open sides of the bunk.

 

                                        Go Back to the JAILS Catalog Page.